how to clean pax 3

How To Clean Pax 3 Vaporizer

WHAT YOU WILL NEED

• Rubbing alcohol or isopropyl alcohol
• Pipe cleaners
  
• Paper towel
  
• Jar or shot glass
  
• Q-tips (optional)
  
• Pax Multi Tool (optional)
  

CLEANING

• Turn your Pax 3 off.
• Remove mouthpiece with multi tool or finger nail.
• Remove packing lid.

• Empty and brush out the herb chamber.
• Insert the wire pipe cleaner from the top of the vaporizer and push through to the bottom to pop out the oven screen.

• Take your oven screen, mouthpieces, concentrate pod and soak them in rubbing alcohol.
  
• If soaking your concentrate pod, be sure to detach the metal chamber from the plastic lid.
  
• Never soak the the black plastic part of the packing lids, as this can damage the plastic.
  

• Moisten a soft pipe cleaner with the rubbing alcohol and floss in and out of the vapour path to remove internal residue.
  
• Now take the pipe cleaner or a soaked Q-tip and swab out the top of your vaporizer and herb chamber.
  

• Remove your screen, mouthpieces and concentrate pod from the cleaning solution and pat dry with a paper towel.
  
• If required, give these items a final swab with your Q-tip or soft pipe cleaner to remove any residue.
  
• To finish cleaning your Pax 3, give your packing lids a once over with your cleaning solution.
  

ALL FINISHED

• Now you can put your squeaky clean PAX back together.
• Lastly, we recommend you complete a Burn-off to remove any residual alcohol left in the device from cleaning. This just requires you to run the device on the maximum temperature with an empty chamber for 5 minutes. It's very simple and you can find some instruction here in the Pax 3 Quickstart Guide.
  

how to clean pax 3

Source: https://www.smokeemporium.com.au/blogs/guides/pax-3-cleaning-maintenance-guide

Posted by: baumgardnerruty1945.blogspot.com

Share this post