USB Suspend:USB Device not Entering Selective Suspend

If afterwards running the powercfg /ENERGY command on your Windows 11 or Windows 10 figurer, and in the Efficiency Diagnostics Study you come across the error bulletin USB Device not Entering Selective Suspend, and then this post is intended to assist you with the most adequate solutions y'all can apply to successfully resolve this issue.

The full error message displayed is forth the post-obit lines;

USB Append:USB Device not Entering Selective Append

This device did not enter the USB Selective Suspend state. Processor power direction may be prevented when this USB device is not in the Selective Suspend country. Note that this consequence will non prevent the system from sleeping.

USB Append:USB Device not Entering Selective Append

If you're faced with this issue, you can try our recommended solutions below in no item order and see if that helps to resolve the USB Suspend:USB Device non Entering Selective Suspend issue on your Windows 11/10 device.

1. Run Power Troubleshooter
2. Enable USB Selective Suspend
3. Change Power Plan
4. Reset and restore Power Plans to default
5. Check and Supersede battery (if applicable)

Let'south take a look at the description of the process involved apropos each of the listed solutions.

one] Run Power Troubleshooter

The upshot that occurred on your Windows eleven/10 PC is power-related; in this case, you can run the inbuilt Power Troubleshooter and let it check for and automatically discover and prepare Power issues.

To run Power Troubleshooter on your Windows 11 device, do the following:

• PressWindows fundamental + I to open Settings app.
• Navigate toOrganisation> Troubleshoot> Other troubleshooters.
• Under theOther section, findAbility.
• ClickRun push button.
• Follow on-screen instructions and apply any recommended fixes.

To run the Ability Troubleshooter on your Windows x PC, practice the following:

• PressWindows key + I to open Settings app.
• Get to Update and Security.
• Click theTroubleshooter tab.
• Coil down and click onPower.
• Click the Run the troubleshooter push.
• Follow on-screen instructions and use any recommended fixes.

If the automated wizard wasn't helpful, you can try the next solution.

2] Enable USB Selective Suspend

The USB Selective Suspend is a pretty great feature for laptop and tablet users, in that it saves power from unnecessary USB devices. If USB Selective Suspend is disabled on your Windows 11/10 organization, it's likely y'all volition run across the upshot in view. In this case, yous can enable USB Selective Suspend via Power Options or Registry Editor.

Try the next solution if this feature is already enabled on your device.

3] Change Ability Programme

A Power Plan in Windows 11/10 is a set of system and hardware settings to manage how your device consumes and conserves power. By default, yous tin selection from three predefined plans (or schemes), including Balanced, Ability saver, and High performance.

You lot may be experiencing this event due to an incorrect ability configuration for performance on your device. In this case, to resolve the issue, y'all tin can change and/or create a custom Power Plan and specify the custom active Power Plan, and force Windows to use the plan. PC users can too alter the Power Programme blazon using the PowerCFG command and can easily troubleshoot Power Plans to fix mutual Power problems and issues in Windows 11/10.

4] Reset and restore Power Plans to default

If irresolute Power Plan wasn't helpful or the error in view started to occur afterward you have changed Power Program, you can reset and restore Ability Plans to default and encounter if that helps.

v] Check and Replace battery (if applicable)

The error in hand simply means that the USB device connected to your Windows eleven/10 PC is likewise consuming power since information technology did non enter the selective suspend state. So, to make up one's mind whether your PC has a hardware battery event, you can check the health of the laptop bombardment and make a note of the difference between the device bombardment'southward full accuse capacity and its designed capacity from the about contempo bombardment report.

To run the bombardment report on your device, do the following:

• Press Windows key + R to invoke the Run dialog.
• In the Run dialog box, type cmd and then hit Enter to open up Command Prompt.
• In the command prompt window, type the command below and hit Enter. A file path volition be displayed and that's where you can detect the battery written report.

powercfg /batteryreport /duration fourteen

Now, if the total charge capacity is lower than the design capacity, it indicates your device is already having a hardware battery issue and you may need to become a replacement. You can also utilise 3rd-party Battery Test software & Diagnostic tools for Windows 11/0.

Hope this helps!

Related mail service: Selective Suspend causes USB devices on USB hub to end working

How practice I turn off USB power saving mode in Windows 10?

To turn off USB power saving mode or disable USB Selective Suspend settings in Windows eleven/10, follow these instructions: follow the steps below:

• Press Windows + X.
• Choose Power Options.
• Select Cull when to plow off the brandish.
• Open Change advanced power settings.
• Aggrandize USB settings and USB selective suspend setting.
• Select Enabled (default) or Disabled.
• Click Apply > OK.

What is Windows ten USB selective suspend setting?

The Windows xi/10 operating arrangement includes the USB selective append feature that lets PC users automatically put USB devices in a very depression-power state when the devices are not actively in use.

Source: https://www.thewindowsclub.com/usb-suspendusb-device-not-entering-selective-suspend

Posted by: baumgardnerruty1945.blogspot.com

Share this post